76
Questo diusore include una ricevente bluetooth di
ultima generazione. Per utilizzarla è suciente agire
sul tasto Mode (8) per selezionare tale funzione. I brani
presenti sullo smartphone potranno essere riprodotti
dal diusore e i tasti funzione (9-11-12) potranno
comandare la scelta dei brani e la loro riproduzione.
Pairing
La prima volta occorre accoppiare smartphone e
speaker anchè possano comunicare tra loro. Questa
operazione prende il nome di “pairing”.
Da smartphone cercate nella schermata bluetooth il
diusore “VORTEX 4”. Potrebbe essere necessario
confermare l’accoppiamento. Una volta connesso,
l’audio verrà riprodotto dal diusore. Ad ogni
riaccensione del diusore, il telefono verrà riconnesso
automaticamente (se diusore è in modalità bluetooth).
Questo speaker dispone della innovativa funzione TWS
che consente di riprodurre la musica da smartphone
su 2 diusori contemporaneamente tramite bluetooth.
Per impostare tale modalità accendete i 2 diusori
e attivate su entrambi la modalità bluetooth. Su un
diusore tenete premuto il tasto PLAY no ad udire
un segnale acustico. A questo punto i due diusori si
connetteranno tra loro. Accoppiate il telefono con il
diusore rilevato per trasmettere musica a entrambi
gli speakers.
FIRMWARE ALTERNATIVI
E’ possibile che siano presenti aggiornamenti del
software interno che permettono di sbloccare ulteriori
funzioni o di bloccarne altre indesiderate.
Registrate il prodotto sul sito www.karmaitaliana.
it e vericate nella scheda prodotto la presenza di
aggiornamenti. Leggete attentamente le note prima di
installare alcun rmware.
CARATTERISTICHE
Alimentazione 5V 1A (cavo USB)
Batteria 1500mAh 3,7V Li-ion
Potenza Max / woofer 25W / 4”
Autonomia Batteria 4 Ore
Tempo di ricarica batteria 2 Ore
Sensibilità >85 dB
Ingressi MIC / TF / USB / AUX
Bluetooth 5.0 con TWS 2.4Ghz
Dimensioni 180 x 180 x 260 mm
Peso 1,21 kg
SPECIFICATIONS
Power Supply 5V 1A (USB cable)
Battery 1500mAh 3,7V Li-ion
Max Power / Woofer 25W / 4”
Battery Life 4 h
Battery Charging Time 2 h
Sensitivity >85 dB
Inputs MIC / TF / USB / AUX
Bluetooth 5.0 with TWS 2.4Ghz
Dimensions 180 x 180 x 260 mm
Weight 1,21 kg
Funzione Bluetooth Bluetooth function
This speaker includes a latest generation bluetooth
receiver. To use it, simply press the Mode key (8) to
select this function. The songs on the smartphone can
be played by the speaker and the function keys (9-11-
12) can control the choice of songs and their playback.
Pairing
The rst time it is necessary to match smartphone and
speaker, so that they can recognize each other. This
operation is dened as “pairing”.
From your smartphone, scan for the “VORTEX 4”
speaker on the bluetooth screen. It might be necessary
to conrm the pairing. Once connected, the audio will
be played from the speaker. Each time the speaker
is turned on again, the phone will be automatically
reconnected (if the speaker is in bluetooth mode).
This speaker features the innovative
TWS
function,
oering the possibility to play music from smartphone
on 2 speakers simultaneously via bluetooth. To set
this mode, turn on the 2 speakers and activate the
bluetooth mode on both. On one speaker, press and
hold the PLAY button until you hear a beep. At this
point the two speakers will connect to each other. Pair
the phone with the detected speaker to transmit music
to both the speakers.
ALTERNATIVE FIRMWARES
There might be some software updates allowing you to
activate additional functions or disable other unwanted
ones.
Register the product on the website www.karmaitaliana.
it and check the product sheet for updates. Read the
notes carefully before installing any rmware.