To Next PageTo Next PageWhy does my Kasco 2400D Marine Equipment De-Icer flow fluctuate?
If your Kasco De-Icer's flow fluctuates or is less than usual, it's often due to debris clogging the unit. Unplug the unit and clear any debris from the screen. Inspect the prop for damage and replace it if needed.
What to do if my Kasco 2400D De-Icer turns off and on by itself?
If your Kasco Marine Equipment De-icer turns off and on without the timer activating or the GFI breaker tripping, the unit is likely overheating, causing the Thermal Overload to activate. Immediately unplug the unit to prevent the Thermal Overload from burning out and damaging the motor. Contact a Kasco representative before restarting.
How to fix a Kasco 2400D Marine Equipment De-Icer that hums but won't start?
If your Kasco Marine Equipment De-Icer hums but doesn't start and starts only when you spin the prop, the starting capacitor likely needs replacement. Have it replaced by an Authorized Repair Center.
Why is my Kasco 2400D De-Icer running slowly?
If your Kasco Marine Equipment De-Icer seems to run slowly, this could be due to an electrical issue causing improper voltage or a problem with the motor. Check that the unit is receiving the correct voltage. If the voltage is correct, contact Kasco for further instructions.
Essential safety and handling guidelines for Kasco De-Icers, covering electrical, operational, and environmental hazards.
Instructions for inspecting the shipment and overview of assembly and installation.
Critical safety warnings and general guidelines for using Kasco De-Icers.
Details about the Kasco De-Icer's 2-year limited warranty and registration.
Conditions under which the Kasco De-Icer warranty becomes void.
Step-by-step procedure for initiating a warranty claim for a Kasco De-Icer.
Procedures for non-warranty repairs, including estimates and shipping.
Details on payment methods for non-warranty repairs, including C.O.D. and credit cards.
Guidelines for proper installation, regular observation, and cleaning the De-Icer.
Guidance on replacing motor seals, oil, and checking the zinc anode.
Determining De-Icer location based on objectives like ice expansion pressure or lifting.
Selecting the best location for installation, considering water depth and warmer water circulation.
Analyzing external constraints like structures and natural currents for optimal installation.
Properly attaching suspension lines to the De-Icer for vertical or angled hanging.
Final installation steps, including power connection and optional curtain technique.
Technical specifications for Kasco De-Icer models and a sizing chart for selection.
Visual assembly diagram and a list of replacement parts for Kasco De-Icers.
Safety precautions for operating the C-10 Thermostat Unit Control.
Step-by-step instructions for operating the C-10 Thermostat Control.
Guidelines for customizing C-10 settings for local conditions and effectiveness.
Details the two-year limited warranty for the Kasco C-10 Thermostat Control.
List of available service parts for Kasco De-Icers and C-10 controls.
Safety precautions, inspection, and mounting instructions for the C-20.
Instructions for programming timer/thermostat and recommendations for C-20 settings.
Details the two-year limited warranty for the Kasco C-20 Time & Temperature Control.
List of available service parts for Kasco De-Icers and C-20 controls.
List of parts, tools, and initial inspection steps for the Universal Dock or Piling Mount.
Steps for installing the dock base, and attaching the first two mount straps.
Steps for connecting pipe extension, adjusting angle, and securing the mount.
List of parts, tools, and initial inspection steps for the Horizontal Float.
Steps for attaching the base strap, adjustment bracket, and angle bracket to the float.
Steps for marking motor housing, placing U-brackets, and attaching angle brackets.
Steps for attaching draw band, ropes, and securing the float in water.
Diagnosing GFI tripping, slow running, starting, and thermal overload issues.
Addressing fluctuating flow and common operational issues with the C-20 control.
Key reminders for submitting units for repair or maintenance.
Section for customers to fill in contact and unit details for repairs.
Instructions for registering the De-Icer warranty online and keeping records.
General| Brand | Kasco |
|---|---|
| Model | 2400D |
| Category | Marine Equipment |
| Language | English |
