To Next PageTo Next PageWhy does my Kasco 2400D Marine Equipment De-Icer flow fluctuate?
If your Kasco De-Icer's flow fluctuates or is less than usual, it's often due to debris clogging the unit. Unplug the unit and clear any debris from the screen. Inspect the prop for damage and replace it if needed.
What to do if my Kasco 2400D De-Icer turns off and on by itself?
If your Kasco Marine Equipment De-icer turns off and on without the timer activating or the GFI breaker tripping, the unit is likely overheating, causing the Thermal Overload to activate. Immediately unplug the unit to prevent the Thermal Overload from burning out and damaging the motor. Contact a Kasco representative before restarting.
How to fix a Kasco 2400D Marine Equipment De-Icer that hums but won't start?
If your Kasco Marine Equipment De-Icer hums but doesn't start and starts only when you spin the prop, the starting capacitor likely needs replacement. Have it replaced by an Authorized Repair Center.
General| Brand | Kasco |
|---|---|
| Model | 2400D |
| Category | Marine Equipment |
| Language | English |
