Kasco VFX - UNIT SPECIFICATIONS & PATTERN SIZE; TOOLS & SUPPLIES NEEDED

2HP-5HP VFX AERATOR MANUAL
3
UNIT SPECIFICATIONS & PATTERN SIZE
• (3) Anchors or stakes for installing unit
• 208-240V electrical supply near pond on a post with room for mounting the control panel
• (4) #10 x 1’’ long or longer screws for mounting the control panel
• 9/16’’ socket with extension and ratchet
• 7/16’’ socket and ratchet or combination wrench
• (3) 12’’ pieces of 1’’ galvanized pipe for weighting ropes (optional)
7/16’’combination
wrench
9/16’’ socket
(extension not shown)
Model Pattern Size Voltage
Operating
Amps
Locked Rotor
Amps
Control Panel
Connection
Unit
Connection
Height Width Single-Phase Units
8400VFX 8’ 32’ 208-240 11 40 Hardwire C-85 Hardwire C-85
5.1FVFX 9’ 34’ 208-240 20 97 Hardwire C-95 Hardwire C-95
3-Phase Units
2.3VFX 8’ 32’ 208 7.5 40
See control panel instructions
5.3VFX 9’ 34’ 208 16 100
2.3HVFX 8’ 32’ 460 3.6 24
5.3HVFX 9’ 34’ 460 7.8 49
TOOLS & SUPPLIES NEEDED
Back to Contents