A check box that enables or disables the wireless LAN interfaces. The default is
to enable wireless communications.
Select Hide Access Point to protect the ADSL route access point from detection
by wireless active scans. If you do not want the access point to be
automatically detected by a wireless station, this checkbox should be
deselected.
The station will not discover this access point. To connect a station to the
access point, the station must manually add this access point name in it's
wireless configuration.
In Windows XP, go to the Network>Properties function to view all of the
available access points. You can also use other software programs such as
NetStumbler to view available access points.
Enter a name for user’s wireless network here. SSID stands for Service Set
Identifier. This name must be between 1 and 32 characters long. The default
name is Kasdaxxxx (xxxx means the last 6 number mac address of KW58283
with uppercase and without colon) .
To Next Page
Loading...
