Kato IC120-2 - Greasing; Vessel; Oscillating Link

MAINTENANCE
IC120-2 ENG 4-7
IC120-2-C401020
6
5
1
4
2,3
GREASING
Refill the grease nipples with grease using a grease gun.
Remove oozed old grease after refilling.
Vessel
Be sure to set the safety bars under the vessel
when lubricating with the vessel raised.
 Hinge pins of the vessel rear gate (1) 2 positions
 Lock pins of the vessel rear gate (2) 2 positions
 Control springs of the vessel rear gate (3) 2 positions
 Vessel joint pins (4) 2 positions
 Dump cylinder rod pins (5) 2 positions
 Dump cylinder foot pins (6) 2 positions
Oscillating Link
 Oscillating link pins (7) 8 positions
NOTICE
Grease the link pins everyday before starting works
if the machine is used on damp grounds or in mud.