Tire Changer KT-830 User’s Manual
13
Installation and commissioning instructions
3.1 Installation Preparation
3.1.1 installation location
⚫ The area should provide the operator with enough space to use the equipment in a safe manner.
⚫ The area selected should be well lit, easy to clean and should be away from oil, grease, brake lathe
chips, etc. Avoid areas where bystanders and customers may be present.
⚫ Equipment installation location should be at least up to the standard shown in Picture, which can ensure
the normal operation and the machine parts are not subject to any restrictions. The tire changer is
forbidden to use in explosive gas.
To Next Page
Loading...