Tire Changer KT-830 User’s Manual
22
◇ Depress the Table Top Pedal to rotate the wheel
◇ The Mount / Demount Head will guide the bead up and over the edge of the wheel.
Continue rotation until the lower bead is demount.
CUSTOM AND SPECIAL WHEELS
ALLOY WHEELS
IF A CUSTOM WHEEL IS DAMAGED WHILE DEMOUNTING, STOP, AND AVOID
DAMAGING THE OTHER WHEELS. CONTINUE ONLY WHEN THE CAUSE IS IDENTIFIED
AND CORRECTED.
Some manufacturers offer wheels with little or
no drop center. These are not DOT approved.
The tire or wheel - or both - can be damaged and
the tire could explode under pressure, resulting
in serious injury or death. If you attempt to
mount/demount this type of wheel, use extreme
caution.
To Next Page
Loading...
