Tire Changer KT-830 User’s Manual
26
MOUNTING TUBE TYPE TIRES
◇ Lubricate the beads and rim liberally.
◇ Position the Mount/Demount Head as described earlier. Mount the bottom bead first.
◇ Apply rubber lubricant to the tube. Insert the tube into the tire, paying careful attention
not to pinch the tube. Round out the tube with a small amount of air.
◇ Lower the Arm Rollers onto the tire as described earlier.
◇ Round out the tube with a small amount of air. Apply rubber lubricant to the tube.
◇ Depress the Table Top Pedal and rotate only a short distance at a time.
◇ Mount the top bead.
DO NOT FORCE THE TIRE ONTO THE RIM. BEAD DAMAGE COULD
RESULT MAKING THE TIRE UNSAFE AND/OR CREATING THE RISK OF
INJURY.
To Next Page
Loading...
