Tire Changer KT-830 User’s Manual
7
1.3.9 Manufacturers are responsible for the damage caused by the use of other parts of the
manufacturer or the damage of the safety device.
1.3.10 periodically check the oil mist, oil, if the oil level is low and need to unscrew the oil
cup and then add. Oil mist using models for ISO Hg and viscosity for ISO vg32 oil mist
special oil (such as: Esso Fedis k32, 1405, Mobil Vacouline, KLUBER32)
1.3.11 if the product is not used for a long time, please user A. disconnect all power supply,
B. and lubricate the turntable fixture slide to prevent oxidation.
1.3.12 when deciding to scrap equipment, to determine the total energy of all the energy to
be cut off, according to the relevant laws and regulations for all non-ferrous metals and non-
ferrous metal scrap processing.
To Next Page
Loading...
