W H E E L B L A N C E R
Wheel balancer operation:
*
After the power is turned on and the device code
is
displayed, the
display window displays
"8.0 5.7 14.0", which proves that the machine is normal.
1. Preparation before the test: check and remove the dust, soil and tread of the tire whether there
are metal, stone and other foreign bodies; Check whether the tire pressure is in line with the
specified value; Check whether the positioning surface and mounting hole of the rim are
deformed, check whether there are foreign bodies in the tire; Remove the original balance block.
2. There are three types of wheel installation, including positive positioning, reverse positioning
and additional flanges for large and medium tires. A positioning method can be selected
arbitrarily according to the actual situation.
Installation of Wheels:
1.
Fo r w a r d Positioning
Order of installation:
-Spindle
-Wheel (rim mounting face inwards)
-Fit cone (small head inwards)- Wheels
-Quick nut
-Forward positioning is a common
positioning method, the operation is simple and fast,
mainly suitable for ordinary steel wheels and thin
aluminum alloy wheels.
2.
Reverse Positioning
-When the wheel outside deformation is
large, the reverse positioning is used to
ensure the accurate positioning of the
inner hole and spindle of the steel rim. It
is suitable for steel wheels, especially for
measuring thick aluminum alloy wheels.
Order of installation:
-Spindle
-Spring
-Fit cone (big head inward)
-Wheel
-Quick nut
To Next Page
Loading...
