Katool KT-B700 - User Manual

READ these instructions before placing unit in service
KEEP these and other materials delivered with the
unit in a binder near the machine for ease of reference
by supervisors and operators.
Computer Wheel Balancer
Operation Instructions
with Maintenance Instructions

Summary

Important Safety Instructions

Definitions of Hazard Levels

Owners Responsibility

Before You Begin

Receiving Shipment

Inspect shipment upon receipt and notify carrier of any damage or shortage.

Technical Specifications

Details cycle time, weight capacity, dimensions, power supply, and noise level.

Product Features

Highlights key capabilities like automatic calibration and multiple operating modes.

Included Accessories

Lists standard items provided with the wheel balancer.

Electrical Requirements

Specifies the required power supply voltage, frequency, and outlet type.

Assembly and Setup

Floor and Space Requirements

Defines necessary floor conditions and clearance space for operation.

Unpacking the Unit

Instructions for removing the balancer and accessories from packaging.

Removing Balancer from Pallet

Safe procedures for lifting and moving the heavy balancer unit.

Connecting to Power

Guidelines for safe and compliant electrical connection to the unit.

Initial Testing Procedure

Steps to perform before the first operational use of the balancer.

Control Panel and Display

Control Panel Layout and Functions

Identifies and explains the purpose of each button and display element.

Function Key Combinations

Details specific button sequences for changing settings like units.

Operating the Balancer

Wheel Mounting Procedures

Guides on preparing and correctly mounting wheels onto the balancer shaft.

Small Car Wheel Positive Positioning

Describes the standard method for mounting passenger car wheels.

Optional Flange Disk Positioning

Details an alternative method for mounting larger or specific tire assemblies.

Entering Wheel Measurements

Inputting Wheel Dimensions

Procedure for entering rim diameter, width, and offset values.

Balance Mode Selection

Explains how to choose between Dynamic, Static, and ALU balancing modes.

Balance the Wheel

Optimize Balancing Function (OPT)

Maintenance and Servicing

Self-Calibration Procedure

Step-by-step guide for recalibrating the balancer for accurate results.

Self-Calibration Issues

Troubleshooting common error messages and data deviation problems.

Accessories

Katool KT-B700 Specifications

General

Max. wheel weight	65 kg
Balancing accuracy	± 1 g
Balancing speed	200 rpm
Rim width	1.5 - 20 inches
Rim diameter	10 - 24 inches