When the plane has slowed almost to the point of stopping push full down
elevator in order to achieve level ight. When this is done at the right mo-
ment the plane will go into horizontal ight with just enough airspeed to
maintain gentle glide. If it is done too early the plane will pitch up her nose
dangerously after a short dive; if it is done too late the plane will stall.
Enjoy your new STRIKE DLG, have a ball!
7
Parts list Qty Building Plan No. Material
Building Plan 1:1 1
Instruction Manual 1
Sheet of Stickers 1
Pushrod Set 2 plastic tube+0.8 mm piano wire
Tail Boom 1 F1 carbon tube Ø7/6 mm
Rib Spacing Jig 1 balsa 1.5 mm
Bag No. 1 – small parts
Tow Hook 1 metal
Neodymium Magnet Ø3 mm 2 F15
Wing Bolt M4 1 M4 nylon
Captive Nut M4 1 M4 aluminium
Rudder Horn 4 breglass1.5 mm
Ball Link Short M2 4
Threaded Coupler M2 2 brass M2/0.8 mm
Rudder and Elevator Servo Tray 1 F12 balsa 4 mm
Carbon Pin 1 Ø5 mm
Fibreglass Cloth 1 110 g/m2
Kevlar ® Thread 1
Quicklink 2
Quicklink Pin 2
Aileron Push Rod 2 carbon rod Ø2 mm
Bag No. 2
Nose Block 1 F5 balsa 10 mm
Servo Hatch 1 F11 plywood 1.2 mm
Parts List
F
A
D
B
E
C
F
B
C
D
F
E
WIND
Left foot
Right foot
Discus Launch
To Next Page
