Kawai K3 - Page 4

Care and Maintenance
For proper care, protect your K-3 from:
e Direct sunlight and exposure to the elements
e Temperature and humidity extremes
e Unstable or “noisy” AC power
e Dust and sand
e Vibration during transport
Power Supply
e Use a supply within the stated voltage limits.
e Make sure that all power switches are off before changing
equipment connections.
e Connect the synthesizer as shown on p. 3.
Cleaning
e Clean the instrument with a soft cloth, a mild detergent, and
lukewarm water.
e Never use harsh or abrasive cleansers or organic solvents.
Helpful Hints
= Battery Backup
The lithium battery protecting the memory contents while the
power supply is off is good for more than five years of normal
use. We recommend, however, that you have your nearest
authorized service representative replace it promptly after five
years have passed.
m Line Noise Reset
In the unlikely event of a “lockup” due to line interference,
simply turn the K-3 synthesizer off for a few seconds and then
reapply the power.
m Repairs
Always save the INTERNAL tone patches to a memory cartridge
before taking the synthesizer in for repairs or servicing. Other-
wise, they may be lost in the course of testing.
W Avoiding Surges
Always turn equipment off before connecting and disconnecting
it.