KaZAM WeeRide - Assembly Instructions

6
MOUNTING THE CHILD CARRIER TO THE BIKE
WARNING! Failure to comply with these manufacturer's Instructions can lead
to serious injury of the passenger or rider.
TOOLS REQUIRED: Adjustable Wrench and Allen Wrench 5 mm.
STEP 1
Lay out parts and remove all packing materials.
STEP 2

 (FIG. 4c)




STEP 3
-
convenience
a. 
a
b. 
IG. 4a
c. 
d. DO NOT ATTACH THE SUPPORT BAR DIRECTLY TO THE HANDLEBAR STEM.

4b. 
p

NOTE: Make sure the resin bumper is in place between the support bar
and the head tube. This is to protect the finish of your bicycle.
e. 




CAUTION: Check the security of all fasteners frequently.
manual WeeRide.indd 6 11/01/11 03:14
ASSEMBLY INSTRUCTIONS