EasyManua.ls Logo

KB Electronics KBCC-225 User Manual

Default Icon
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
KBPB & KBCC-R SUPPLEMENTAL INFORMATION
DESCRIPTION
T
he Anti-Plug Reversing Module used in the KBPB and KBCC-R models has been changed
f
rom APRM-2C to APRM-3. The General Performance Specifications of these products have
n
ot changed. This supplement is being supplied with the KBPB and KBCC-R Installation and
O
peration Manuals (Part Nos. A40210A and A40225A) until the new manuals are available.
T
he figures below replace the figures in the KBPB and KBCC-R Installation and Operation
M
anuals. For further assistance, contact our Sales Department toll free, at 800-221-6570.
Read Safety Warning
F
SAFETY WARNING!
This drive contains electronic Start/Stop circuits which can be
used to start and stop the drive. However, these circuits are
n
ever to be used as safety disconnects since they are not fail-
safe. Use only the AC line for this purpose. Be sure to follow all
i
nstructions carefully. Fire and/or electrocution can result due to
i
mproper use of this product.
P
ower
M
ain Speed Potentiometer
F
orward-Brake-Reverse Switch
CHASSIS
(
EARTH)
GROUND
A
C LINE INPUT
ARMATURE
-+
A2A1L2L1
TB3
TB1
P3P1 P2 S1 S2 S3 S4
HIGH
WIPER
LOW
POTENTIOMETER
MAIN SPEED
BRK
REV
FWD
S4S3S2S1P2P1 P3
TB1
F
WD-BRK-REV SWITCH
Run-Brake and Forward-Reverse Switches
Forward-Brake-Reverse Switch with
Adjustable Forward and Preset Reverse Speed
Forward-Brake-Reverse and Run-Brake-Jog
Switches with Main Speed Potentiometer
REV
TB1
S3S2 S4P3 S1P1 P2
FWD
RUN-BRAKE SWITCH
FWD-REV SWITCH
TB1
S4S3S1 S2P2P1 P3
BRK REVFWD
FWD-BRK-REV SWITCH
WIPER
HIGH
LOW
POTENTIOMETER
MAIN SPEED
BRK
JOG
RUN
REV
FWD
BRK
TB1
S3 S4S1 S2P1 P2 P3
RUN-BRK-JOG SWITCH
HIGH
WIPER
LOW
POTENTIOMETER
MAIN SPEED
FWD-BRK-REV SWITCH
Forward-Brake-Reverse and Run-Brake-Jog
Switches with Main Speed Potentiometer
and Remote Jog Potentiometer
Tach-Generator Feedback Connections
50 Volts per 1000 RPM Tach-Generator 7 Volts per 1000 RPM Tach-Generator
BRK
FWD
REV
S4
TB1
S3S2S1P3P1 P2
REMOTE JOG
POTENTIOMETER
LOW
HIGH
WIPER
POTENTIOMETER
MAIN SPEED
FWD-BRK-REV SWITCH
RUN-BRK-JOG SWITCH
BRK JOGRUN
(ON KBMM)
-
F-F+
TACH-GENERATOR
"B" TERMINAL
+
TB2
-+
(ON KBMM)
"T" TERMINAL
TACH-GENERATOR
F+ F-
TB2
(A40150) – Rev. C – 7/2006
Print Code
KB ELECTRONICS, INC.
12095 NW 39th Street, Coral Springs, FL 33065-2516 • (954) 346-4900 • FAX (954) 346-3377
Outside Florida Call Toll Free (800) 221-6570 • info@kbelectronics.com
www.kbelectronics.com
Question and Answer IconNeed help?

Do you have a question about the KB Electronics KBCC-225 and is the answer not in the manual?

KB Electronics KBCC-225 Specifications

General IconGeneral
BrandKB Electronics
ModelKBCC-225
CategoryControl Unit
LanguageEnglish

Summary

Description

Safety Warning

Critical safety information regarding electrical hazards and proper use of the control.

General Information

Installation Instructions

Initial Setup and Wiring

Steps for connecting the control, including resistor installation and wiring.

Voltage Following

How to use an analog voltage reference instead of a speed potentiometer.

Adjustments and Control Functions

Acceleration Start Adjustment

How to adjust the ACCEL trimpot for desired ramp-up time.

Deceleration Adjustment

How to adjust the DECEL trimpot for desired ramp-down time.

Current Limit (CL/Torque) Adjustment

Setting the current limit for motor protection and overload control.

Application Information

Switching Functions "R" Suffix Models

Details on Run-Brake, Forward-Brake-Reverse, and Jog functions for R-suffix models.

Troubleshooting Guide

KBMM-125 Parts List

KBMM-225 Parts List

APRM-2C-120V Parts List

Related product manuals