01/2022
The rights to technical and design alterations are reserved. KBL GmbH · Ringstraße 24-26 · 56307 Dernbach · Germany
fon +49 (0) 26 89.94 26-0 · fax 94 26-66 · eMail info@kbl.de · www.kbl.de
Service information: SI00094
2/3
❷
Install new lter capacitors.
• Connect new capacitor (as shown in
the image).
• Fixate loose cables with cable ties.
Connect wiring harness
with two capacitors to
the lower LED panel.
If capacitor is missing, connect
wiring harness with one capaci-
tor to the upper LED panel.
To Next Page
Loading...
