Need help?Do you have a question about the KC 60 Series and is the answer not in the manual?
General| Application | Water supply, irrigation, industrial processes |
|---|---|
| Maximum Flow Rate | 60 m³/h |
| Maximum Head | 60 m |
| Liquid Temperature | Up to 60°C |
| Enclosure Class | IP55 |
Force lids open at both ends, push the spring-loaded knob, and insert the nylon line eye to the release mechanism pin.
Always use the correct 400g drop messenger for the Niskin water sampler to prevent damage or malfunction.
Hold the lower part firmly, turn the upper part clockwise, insert the wire, and release the handle to close the messenger.
Use an 800g drop messenger with the centre hanger; hold lower part, turn upper part, insert wire, and lock the top.
KC Denmark A/S is not liable for damage from misuse. Maintenance must be done by expert technicians. Adhere to safety precautions.
Ensure vertical position for release. If the mechanism is sluggish, apply a thin oil like WD-40.
Wash all parts with fresh water and move the release mechanism to clear dirt. Dry all internal parts and seals before storing.
Store with lids closed. For long-term storage, remove the rubber band to maintain its strength. PVC glue can be used for valve repairs.
To Next Page