Need help?Do you have a question about the KCF technologies SMARTdiagnostics and is the answer not in the manual?
Provides an overview of the HUB's role and benefits in various industries.
Explains the operational flow of the HUB, sensor connection, and data transmission.
Details the practical use cases and environmental suitability of the HUB and its sensors.
Details specifications for the IoT HUB device.
Lists physical attributes like weight, enclosure material, and mounting details.
Details power input, accessory power, and battery life for AC and battery powered options.
Outlines temperature ranges, IP rating, and hazardous certification for the HUB.
Provides details on the wireless radio used, including band, antenna, FCC ID, and IC.
Describes collection modes and input types supported by the HUB.
Lists available part number variants for the HUB based on configuration options.
Details specifications for the wired vibration sensor.
Details the physical attributes of the wired vibration sensor, including weight and mounting.
Specifies operating and storage temperature ranges and IP rating for the sensor.
Provides detailed technical specifications for acceleration measurement, including range, resolution, and frequency response.
Lists the range and resolution for the temperature sensor.
Details available part number variants for the wired vibration sensor.
Recommends specific tools for safe and organized installation of the HUB and sensors.
Refers to an external guide for detailed hardware installation procedures by trained staff.
Outlines the general process for setting up the HUB within the SMARTdiagnostics software.
Guides users on configuring HUB and sensor settings within the SMARTdiagnostics interface.
Explains how to initiate and manage long burst data collection in SMARTdiagnostics.
Provides contact details for support assistance with the HUB and SMARTdiagnostics system.
Details the limited warranties offered for products and the procedures for returns.
Presents FCC and Industry Canada statements regarding device compliance and RF exposure.
General| Input Type | Voltage |
|---|---|
| Resolution | 24-bit |
| Connectivity | Ethernet, Wi-Fi |
| Power Source | Internal Battery |
| Measurement Parameters | Vibration, Temperature |
| Compatibility | SMARTdiagnostics Platform |
To Next Page