Need help?Do you have a question about the KDS K-7X and is the answer not in the manual?
Essential safety guidelines for operating R/C models and the KDS-7X system.
Procedure to bind the transmitter and receiver for system operation.
Setting servo channels to normal or reverse operation.
Adjusting the travel (end point) for each channel from 0 to 120.
Setting sub trim values for channels from -100 to 100 for fine adjustment.
Configuring dual rates for aileron, elevator, and rudder for different flight characteristics.
Adjusting gyro sensitivity for head-lock or non-lock modes.
Defining 5-point throttle curves for NORMAL and IDLE modes.
Defining 5-point pitch curves for NORMAL, IDLE, and HOLD modes.
General| Brand | KDS |
|---|---|
| Model | K-7X |
| Category | Remote Control |
| Language | English |
To Next Page
