Need help?Do you have a question about the KDS KDS-7XII and is the answer not in the manual?
Legal disclaimer regarding product changes, liability, and warranty.
Essential safety guidelines for operating the RC system and models properly.
Instructions for correctly installing the receiver and antenna for optimal performance.
Guidance on connecting various components to the receiver channels.
Step-by-step process to establish communication between the transmitter and receiver.
Information on understanding and testing the system's effective control range.
Lists the key capabilities and features of the KDS-7XII system.
Identifies and explains the functions of the transmitter's buttons and controls.
Instructions for charging the transmitter's batteries using an external power source.
Guide on how to adjust the length and feel of the control sticks.
Steps to enter and navigate the system configuration menu.
Details on configuring the system for helicopter control modes (HP1, HP2, HP3).
How to reverse the direction of control signals for specific channels.
Adjusting the maximum travel limits for each control channel.
Fine-tuning the center position of control channels.
Setting different control sensitivities for various flight conditions.
Adjusting the exponential curve for control inputs.
Setting up the function to lock the throttle position.
Adjusting the sensitivity for the gyro system in different modes.
Configuring auxiliary channels controlled by switches.
Defining the throttle response curve for different flight modes.
Setting the collective pitch curve for helicopter control.
Configuring swash plate mixing for helicopter control.
Details on configuring the system for airplane (AERO) flight modes.
Configuring the system for V-tail aircraft control.
Setting up the V-tail mixing parameters for proper control.
Configuring the system for Delta wing aircraft control.
Setting up the Delta wing mixing parameters for proper control.
How to select and manage different model memory profiles.
Adjusting the neutral position of control sticks for fine-tuning.
Information on the throttle position warning system.
Information on the IDLE switch warning system.
Setting and using the countdown timer related to throttle operation.
Configuring the failsafe behavior for loss of signal.
Information on using the PPM signal output for compatibility.
Steps to change the transmitter's frequency and ID to avoid interference.
General| Brand | KDS |
|---|---|
| Model | KDS-7XII |
| Category | Remote Control |
| Language | English |
To Next Page
