Keba KeContact KC-P30 x Series - 2.2.2 Direct Master-Client Connection; 2.2.3 Connection via Router or Switch

KC-P30 x-series System overview
Configuration manual V4.14
13
© KEBA
2.2.2 Direct connection of master and client
A single client charging station can be connected directly to the master
charging station via LAN.
Fig.2-3: Direct connection of master and client
1 ... x-series (master) 2 ... c-series (client)
In this case, the master charging station must be configured as a DHCP
server. The IP address is then assigned to the client charging station by the
master charging station.
2.2.3 Connection via router or switch
If there are multiple client charging stations, these must be connected to the
master via a router or switch. The connection of the charging station to the
router/switch is made via LAN.
Fig.2-4: Connection via router or switch
1 ... Router/Switch 2 ... P30 x-series (master)
3 ... P30 c-series (client)