Keba KeContact KC-P30 x Series - System Overview; 2.1 Network Interfaces

KC-P30 x-series System overview
Configuration manual V4.14
8
© KEBA
2 System overview
The P30 x-series (depending on the variant) enables multiple charging sta-
tions to be connected with each other in the form of a master/client network.
This makes charging with an intelligent load management possible. In addi-
tion, a connection to a higher-level OCPP backend can take place. The
charging station is equipped with different network interfaces for these func-
tions.
Fig.2-2: Example network setup
1 ... Local charging network 2 ... Router/Switch
3 ... Master charging station (x-series) 4 ... Client charging station (c-series)
5 ... Higher-level network/Internet 6 ... OCPP backend
Only the P30 x-series (depending on the variant) can be operated as master
charging stations, and only the c-series as client charging stations.
The following chapters describe which network interfaces the P30 x-series
(master charging station) provides and how to set up a master/client net-
work.
2.1 Network interfaces
The P30 x-series provides the following network interfaces (e.g. for connec-
tion to an OCPP backend, etc.):
● LAN
● WLAN (optional)
● WLAN access point (optional)
● Mobile communications (optional)