KC-P30 x-series Web interface
Configuration manual V4.14
28
© KEBA
● Maximum of 2 successive identical characters
● At least 3 of the following criteria are fulfilled:
− 1 uppercase letter (A−Z)
− 1 lowercase letter (a−z)
− 1 number (0−9)
− 1 special character
Language of the graphic user interface
The language of the graphic user interface can be changed here.
Remote service interface
The remote access to the charging station can be enabled here. This en-
ables a service technician to access the charging station via an encrypted
connection. These settings can also be configured on the OCPP backend.
Log level
For error diagnosis, it can be necessary to record the operations of the
charging station in detail. This can be enabled in this area of the DEBUG
mode. To ensure that the recorded data quantity is not too large, the dura-
tion for the detailed recording must also be specified.
Recovery key
If you forget the web interface password, you can reset it using the displayed
recovery key. The recovery key can also be found on the configuration label.
Information
The recovery key absolutely must be kept in a safe place for the entire life
of the product!
To Next Page
Loading...
