© KEBA 2013-2023
Specifications are subject to change due to further technical developments. Details presented may be subject to correction.
All rights reserved.
Document: Revision 3.00 / Article no.: 92651
KEBA Energy Automation GmbH: Reindlstraße 51, 4040 Linz, Austria
+43 732 7090-0, +43 732 7309-10, kecontact@keba.com
For information about KEBA and our subsidiaries please look at www.keba.com.
Comments to this manual
In this manual you will find warnings against possible dangerous situations. The used symbols apply
to the following meanings:
Notice
Notes on use of equipment and useful practical tips are identified by “Notice". Notices do not con-
tain any information that draws attention to potentially dangerous or harmful functions.
Concerning this manual
This manual is intended for use by customers and personnel with the relevant technical knowledge in
the applicable area and appropriate to the operations they are required to perform.
Target group:
• Customers/personnel with some programming knowledge
List of changes
To Next Page
Loading...
