A2xx Operation and handling
Operating instructions V1.01
37
© KEBA
The status of the Bluetooth connection remains stored when the device is
switched off. When the device is switched back, a connection to a receiver is
established again if possible.
The wireless connection can be disabled by briefly pressing the operating
button. The Bluetooth icon will no longer be displayed.
Linkage
The device is automatically linked with the receiver when the connection is
first established.
If the device has already been connected to a different receiver and this re-
ceiver is no longer in range or is switched off, a connection establishment is
attempted and terminated. The icon for the connection quality flashes while
this is being done. In this case, the linkage can be deleted by switching the
Bluetooth connection on and off again.
To Next Page
Loading...
Need help?
General
