Next
Home
Back
27
The Keeler Pulsair intelliPuff tonometer is a medical electrical instrument. The instrument requires special care concerning
electromagnetic compatibility (EMC).This Section describes its suitability in terms of electromagnetic compatibility of this
instrument. When installing or using this instrument, please read carefully and observe what is described here.
1. Portable or mobile-type radio frequency communication units may have an adverse effect on this
instrument, resulting in malfunctioning.
16. Specifications and electrical ratings
Guidance and manufacturer’s declaration – electromagnetic emissions
The Keeler Pulsair intelliPuff is intended for use in the electromagnetic environment specified below. The customer or user should
assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1 The Keeler Pulsair intelliPuff uses RF energy only for its
internal function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby electronic
equipment.
RF emissions
CISPR 11
Class B The Keeler Pulsair intelliPuff is suitable for use in all
establishments including domestic establishments and those
directly connected to the public low-voltage power supply
network that supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies
To Next Page
Loading...
Need help?
General
