EasyManua.ls Logo

Keen Pump KL - User Manual

Default Icon
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
471 US Hwy 250 East, Ashland, Ohio 44805
PH: 419-207-9400 FX: 419-207-8031
_______________________________________________________________________________
INSTALLATION AND SERVICE INSTRUCTIONS
FOR “KLGUIDE RAIL SYSTEM /SUBMERSIBLE
NON-CLOG SEWAGE PUMPS
_______________________________________________________________________________
Question and Answer IconNeed help?

Do you have a question about the Keen Pump KL and is the answer not in the manual?

Summary

General Information

Before Operation

Instructions to follow before operating the pump, emphasizing care and safety.

Attention

Important information regarding safe product use and manual retention.

Unpacking Pump

Procedure for checking the pump upon unpacking for concealed damage.

System Description

Overview of the KL Rail System, including simplex and duplex setups.

Simplex System Components

Lists components for a single pump (simplex) system.

Duplex System Components

Lists components for a two-pump (duplex) system.

Pumps Not Operating or in Storage

Guidance on rotating impellers for pumps idle for extended periods.

Codes

Emphasis on observing local codes and consulting inspectors.

Pump Installation

Concrete Basin Installation

Guidance on preparing concrete basins or precast rings for pump installation.

Discharge Elbow Installation

Instructions for correctly positioning and securing the discharge elbow in the basin.

Discharge Piping Installation

Steps for installing vertical and horizontal discharge piping with bracing.

Basin Cover Installation

Details on installing basin covers, including door and frame assemblies.

Guide Rail Installation

Procedure for attaching guide rails from the discharge elbow to the door frame.

Intermediate Guide Rail Bracing

Requirements for bracing guide rails based on sump depth.

Exterior Piping Installation

Instructions for installing inlet, drain, and vent piping into the basin.

Pump and Sealing Flange Assembly

Guidance on assembling the sealing flange to the pump discharge flange.

Pump Lowering and Installation

Steps for lowering the pump into the basin using guide rails and lifting assembly.

Float Switch Mounting and Adjustment

Instructions for mounting float switches and adjusting their position for sump level control.

Remote Control Panel Wiring

Procedure for connecting control panel wiring through the basin wall.

Pump Operations

Pump Maintenance

Removing Pump for Servicing

Steps for safely removing a pump from the basin for maintenance.

Float Controls Replacement

Procedure for removing and replacing float controls for maintenance.

Pump Troubleshooting

Pump Runs But No Water Discharge

Diagnosing and resolving issues where the pump operates but does not discharge water.

Basin Level Not Pumped Down in Auto

Troubleshooting why the basin level is not reduced when the pump is in automatic mode.

Limited 3-Year Warranty

Warranty Period

Specifies the duration and conditions for the warranty period.

Warranty Exclusions

Details conditions and actions that void the product warranty.

Liability Limitation

Defines limitations on Keen Pump's liability for damages.

Labor, Etc., Costs

States Keen Pump's non-responsibility for labor or incidental costs.

Returned or Replaced Components

Instructions for returning components for warranty claims.

Keen Pump KL Specifications

General IconGeneral
BrandKeen Pump
ModelKL
CategoryWater Pump
LanguageEnglish

Related product manuals