8
ASSEMBLY INSTRUCTIONS
REAR WHEELS INSTALLATION AND REMOVAL
STEP 1: Align the rear wheelset axle with the hole in the rear foot socket and insert it until a ringing
snap is heard. Pull the wheelset in the opposite direction to confirm that the wheelset is in place.
STEP 2: Insert a single rear wheel into the wheel hole laterally. When the sound clicks, pull the rear
wheel in the opposite direction to determine whether the wheel is installed in place.
STEP 1: Find the rear wheel group quick-release button (1), press the wheel rod down the whole
wheel group to pull out.
STEP 2: Find the rear wheel quick-release button (2), pull out the button, and pull out the rear wheel
in the opposite direction.
To Next Page
Loading...
