EasyManua.ls Logo

Kees van der Westen spirit User Manual

Kees van der Westen spirit
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Installation manual Spirit
Document ID: Sup-Rim-Eng Date of issue: October 22, 2014 Revision date: May 31, 2016
Question and Answer IconNeed help?

Do you have a question about the Kees van der Westen spirit and is the answer not in the manual?

Kees van der Westen spirit Specifications

General IconGeneral
TypeEspresso Machine
ManufacturerKees van der Westen
ModelSpirit
Pump TypeRotary
MaterialStainless Steel
Water Tank Capacity5 liters
DimensionsVaries depending on group configuration
DepthVaries by configuration
HeightApproximately 470 mm
WeightVaries by configuration
PowerVaries by configuration
Voltage220-240V

Summary

Installation Quickstart

Connect Water

Connect the water supply and water treatment system to the machine's pumps.

Connect Water Disposal

Attach the discharge hoses for waste water and drip tray to the machine.

Open Water Mains

Turn on the water supply and check for leaks at all connections.

Ensure Machine is Switched Off

Verify the main switch is "OFF" and controller switches are down.

Connect Electricity

Connect the mains power cable and pump cables to the machine's terminals.

Fire Up and Adjust

Turn on the machine, fill boilers, and set initial brewing pressure and temperature.

Welcome and Manual Notes

Parts Identification

Identifies the main operational parts of the Spirit espresso machine with numbered labels.

Note on the Manual

Provides information about the manual's development, content, and feedback process.

Pre-Installation Preparations

Area Preparation

Details countertop requirements, space, and proximity for water and power connections.

General Installation Tips

Provides practical advice for installation, such as knock-box placement and fridge proximity.

Installation Procedures and Connections

Arrival and Placement

Details parts included, extra materials, and procedures for unpacking and placing the machine.

Safety Precautions

Highlights important safety warnings and precautions for installation personnel.

Water Supply and Discharge

Guides for connecting water mains, treatment system, pumps, and waste discharge.

Electrical Connections

Details electrical requirements, phases, mains switch, and wiring for safe operation.

Filling and Purging Systems

Procedures for filling the boilers with water and expelling air from the coffee system.

First Use and Adjustments

Machine Heating Up

Describes the process and time required for the boilers to reach operational temperature.

Setting Hot Water Dosage

Guides on how to program the hot water dispenser timer for desired volumes.

Adjust Coffee Pump Pressure

Explains how to adjust the pump pressure for optimal espresso extraction.

Set Hot Water Temperature

Details how to adjust hot water temperature by modifying steam boiler pump pressure.

Additional Information and Contact

Online Resources

Provides website links for user manuals and parts lists for further details.

Contact Information

Lists company contact details, including telephone, email, and website.

Related product manuals