Need help?Do you have a question about the Kees van der Westen Mirage and is the answer not in the manual?
General| Brand | Kees van der Westen |
|---|---|
| Model | Mirage |
| Category | Coffee Maker |
| Language | English |
Shows a side view of the Mirage with key measurements in millimeters.
Discusses achieving stable water temperature at the coffee bed.
Lists essential tools and materials for machine maintenance tasks.
Instructions for safely removing glass and aluminum side panels.
Steps to remove and reinstall the cup warming tray.
Detailed steps for removing and remounting the upper side panels.
Explains the relationship between steam boiler temperature and steam power output.
Guidance on adjusting the brew temperature by modifying the restrictor.
Instructions for adjusting the pump pressure.
Procedure for checking the functionality of the water softener system.
Description, function, and replacement procedure for the anti-vacuum valve.
Maintenance procedure for steam and hot water wands, focusing on lubrication.
Procedure to inspect tubing for scale and clean or replace as needed.
Steps to check and clean the restrictor in the mix-block for scale.
Explains the function of the safety valve and its replacement.
Information on checking and adjusting the expansion valve pressure.
Detailed steps for rebuilding steam and hot water valves.
Procedure for cleaning the water level probes for optimal function.
Recommendations and procedures for replacing solenoid valves.
Steps for removing and replacing flange valves on the mix-block.
Instructions for removing and replacing group solenoid valves.
Procedure for removing and replacing the fill valve.
Steps for removing and replacing the solenoid steam valve.
Instructions for draining water to prevent freezing damage.
Procedure for draining water from the heat exchangers.
Electrical schematic for the 1-phase Duette model.
Electrical schematics for 3-phase Duette high power and Triplette models.
Explains the low voltage circuits for water level control and water metering.
Details the 3-way mains switch function for the Duette 1-phase.
Explains the 4x 3-way mains switch for high power models.
Shows wiring differences for 3-phase and 1-phase on Triplette connector blocks.
Discusses the Gicar controller's functions and potential failures.
Step-by-step guide for replacing the Gicar controller.
Information on the Stork ST25 temperature controller and its parameters.
Explains the function and types of solid state relays used in the machine.
Identifies issues when SSRs keep heating elements on.
Detailed instructions for replacing a solid state relay.
Troubleshooting steps for SSR issues and safety overheating switch.
Information on heating elements, spirals, and resistance values.
How to handle a short-circuited heating spiral.
Procedure for dealing with a burnt-out heating spiral.
Details on sealing methods for heating element flanges.
Links to website for latest manuals and spare parts lists.
Kees van der Westen contact details for support and ordering parts.
To Next Page
