B
BB
BATTERY
ATTERYATTERY
ATTERY
SPECIFICATIONS
SPECIFICATIONSSPECIFICATIONS
SPECIFICATIONS
Type designation YB4L-B
Capacity 12V 4Ah
Standard electrolyte 1.28(20℃)
INITIAL CHARGING
INITIAL CHARGINGINITIAL CHARGING
INITIAL CHARGING
FILLNG ELECTROLYTE
·Remove the aluminum tape ① sealing the battery elec-
trolyte filler holes.
·Remove the caps ②.
NOTE：
*After filling the electrolyte completely,use the removed
cap ② as the sealed caps of battery-filler holes.
*Do not remove or pierce the sealed areas ③ of the elec-
trolyte container.
·Insert the nozzles of the electrolyte container into the
battery`s electrolyte filler holes,holding the container
firmly so that it doer not fall.Take precaution not to allow
any of the fluid to spill.
·Make sure air bubbles are coming up each electrolyte container,and
leave in the positon for about more than 20 minutes.
To Next Page
Loading...
Need help?
General
