Need help?Do you have a question about the KEF E305 and is the answer not in the manual?
General| Product color | White |
|---|---|
| RMS rated power | - W |
| Recommended usage | Home theatre |
| Audio output channels | 5.1 channels |
| Amplification device included | Yes |
| Satellite speaker type | 2-way |
| Satellite speaker weight | 2400 g |
| Number of satellite speakers | 4 |
| Satellite speaker sensitivity | 86 dB |
| Satellite speaker frequency range | 80 - 45000 Hz |
| Satellite speaker tweeter diameter | 0.75 \ |
| Satellite speaker dimensions (WxDxH) | 136 x 159 x 260 mm |
| Satellite speaker crossover frequency | 2700 Hz |
| Satellite speaker mid-range driver diameter | 4.25 \ |
| Center speaker dimensions (WxDxH) | 220 x 155 x 157 mm |
| Subwoofer type | Active subwoofer |
| Subwoofer weight | 7250 g |
| Subwoofer sensitivity | 102 dB |
| Subwoofer frequency range | 33 - 280 Hz |
| Subwoofer dimensions (WxDxH) | 430 x 270 x 320 mm |
| Subwoofer driver diameter (imperial) | 8 \ |
| Power source | AC |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
Expresses gratitude to the customer and encourages reading the manual before use.
General guidelines for safe operation, cleaning, and handling of the equipment.
Crucial warnings about fire and electric shock risks, including cautionary symbols.
Explains the meaning of graphical symbols used in the manual and on the product.
Instructions for environmentally responsible disposal and recycling of the product.
Detailed numbered instructions covering operation, handling, and servicing of the appliance.
Advises caution to avoid cutting cables, pipes, or joists during installation.
Provides a paper template for accurate drilling and speaker placement during wall mounting.
Illustrates the process of connecting speaker cables to the speaker terminals.
Details how to attach and adjust the ball joint for speaker positioning.
Diagrams illustrating the connection of front, rear, and center speakers to an AV processor or receiver.
Diagram showing how to connect the subwoofer to the amplifier/receiver.
Configures the subwoofer's standby mode based on signal detection.
Allows phase adjustment (0° or 180°) for optimal sound output.
Adjusts low-frequency response (-4dB, 0dB, +2dB) to suit room acoustics.
Displays the power status of the subwoofer (ON/OFF).
Guide for setting speaker sizes (Small) and subwoofer presence for optimal sound.
Indicates whether the subwoofer is included and configured in the system.
Details model, design, drive units, frequency range, and sensitivity for E301/E301c.
Lists model E-2 specs including power, frequency range, dimensions, and weight.
Lists contact details for KEF offices worldwide.
To Next Page
