KEF Wireless System User Manual

System
Wireless
www.kef.com
Issue 1: March 2007
Frequency band: 2.4 - 2.4835GHz (ISM band) Sensitivity: 80dB typical
Data rate: Up to 1.1Mbps Frequency range: 20Hz - 20kHz
Transmission protocol: AAFHSS Peak audio output: 50W rms
Range: 25m (27.3 yds) Typical Maximum* Amplifier: 2 x 50W digital amplifier
Min. Impedance: 4Ω Available Finishes: High Gloss Black
Transmitter Module 147 x 79 x 79mm Receiver Modules 147 x 79 x 79mm
Dimensions (hxwxd): (5.8 x 3.1 x 3.1in.) Dimensions (hxwxd): (5.8 x 3.1 x 3.1in.)
www.kef.com
290203ML
GP Acoustics (UK) Ltd., Eccleston Road,Tovil, Maidstone, Kent ME15 6QP U.K. Tel: + 44 (0)1622 672261 Fax: + 44 (0)1622 750653
GP Acoustics (US) Inc., 10 Timber Lane, Marlboro, New Jersey 07746 U.S.A. Tel: +(1) 732 683 2356 Fax: +(1) 732 683 2358
GP Acoustics GmbH, Heinrichstraße 51, D-44536 Lünen, Deutschland. Tel: +49 (0) 231 9860-320. Fax: +49 (0) 231 9860-330
GP Acoustics (France) SAS, 39 Rue des Granges Galand - BP414, 37554 Saint Avertin CEDEX, France. Tel : +33(0)2 47 80 49 01 Fax : +33(0)2 47 27 89 64
GP Acoustics (HK) Limited, 6F, Gold Peak Building, 30 Kwai Wing road, Kwai Chung, N.T., Hong Kong. Tel: +85 (0) 2410 8188 Fax: +85 (0) 2401 0754
* Environmental factors such as building materials and construction may adversely affect wireless signal range.
GP Acoustics (UK) Ltd. reserve the right, in line with continuous research and development, to amend or change specifications without prior notice. E. & O.E.
Specifications
Installation Manual
Manuel d’installation
Installationshandbuch
Manual de instalação
Manual de instalación
Manuale d’installazione
Installatie
Installationsanvisning
Instrukcja Montażu
EN
FR
DE
PT
IT
NL
DK
PL
ES RU
(FR) Spécifications (DE) Technische Merkmale (PT) Especificações (ES) Especificaciones (IT) Specifiche (NL) Technische gegevens (DK) Specifikationer
(PL) Specyfikacja techniczna (RU)
K7236_KEF Wireless System manual A5 14/3/07 09:05 Page 1

KEF Wireless System Specifications

General

Brand	KEF
Model	Wireless System
Category	Speaker System
Language	English

Summary

Specifications

Safety Precautions

Introduction

Surround Sound Settings

Connecting the Receiver Units

Connect Speaker Wire to Receiver

Connect speaker wire from receiver terminal caps to the speaker.

Identify Left/Right Receiver

Ensure LEFT receiver connects to REAR LEFT SPEAKER, RIGHT to REAR RIGHT.

Connect AC-DC Adaptor to Receiver

Insert AC-DC adaptor cable into the DC jack socket of each receiver.

Connect Receiver to Mains Power

Connect AC-DC adaptor plug into the mains AC wall socket.

Connecting the Transmitter Unit

Power Off AV Equipment

Turn off all A/V equipment before installing the wireless system.

Connect Transmitter Power and Audio Jacks

Connect AC-DC adaptor and KEF Audio Jack to the transmitter.

Connect Speaker Inputs to AV Receiver

Connect speaker inputs to REAR LEFT and REAR RIGHT terminals of AV receiver.

Position Transmitter Unit

Rotate transmitter so front panel faces wireless speakers.

Connect Transmitter Power and Turn On

Connect power supply and press the power button on the front panel.

Verify Bonding Light

Ensure blue bonding light is steady to confirm connection.

Turn On Audio Source and Adjust Volume

Turn on audio source and adjust volume using its remote control.

LED Indicator

Steady LED Indicator

Indicates transmitter and receiver units are bonded and ready for audio output.

Flashing LED Indicator

Indicates power is on, but an issue prevents audio output.