Need help?Do you have a question about the KEF Corelli and is the answer not in the manual?
General| Type | 2-way bookshelf speaker |
|---|---|
| Impedance | 8 Ohms |
| Sensitivity | 86dB |
| Woofer | 200mm (8") |
| Tweeter | 1 inch |
Ensure amplifier load matches speaker requirements for optimal volume without distortion.
Use suitable twin PVC flex for runs up to 12 yards; longer runs need thicker cable to minimize resistance losses.
Correct polarity is essential for stereo; marked terminals ensure proper connection and fuller bass reproduction.
Position speakers 6-12 ft apart, 2-3 ft high, tilted or angled for optimal stereo image and bass.
Model Corelli can be used vertically or horizontally; the KEF badge is rotatable to any desired angle.
Room acoustics profoundly affect reproduction quality, influencing tonal balance and stereo image.
Hard surfaces cause harsh treble; reflections blur stereo image; use soft furnishings or drapes to mitigate.
Suspended floors can cause boomy or lost bass; try foam pads or move speakers to a firmer floor section.
Move speakers away from walls or use drapes to cut down reflections for a better stereo image.
Carry out listening tests with a wide variety of programme material before final placement.
A variety of recordings are recommended for their wide frequency range and general technical excellence.
To Next Page
