To Next PageTo Next Page
Need help?Do you have a question about the KEF PSW2010 and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Weight | 17 kg |
| Input Impedance | 10 kOhms |
| Inputs | Line Level, Speaker Level |
| Driver | 250mm (10in.) |
Covers instructions, warnings, water, ventilation, heat, power sources, grounding, cord protection, cleaning, and non-use.
Covers object/liquid entry, damage requiring service, and user servicing limitations.
Identifies and describes the various controls and input/output sockets on the rear panel.
Adjusts the upper cut-off frequency for smooth integration with main speakers.
Adjusts phase for optimal output level, especially when subwoofer is distant.
Adjusts subwoofer output level relative to satellite or AV speakers.
Enables/disables standby mode, allowing automatic standby after 45 mins of inactivity.
Enhances compatibility and breaks earth loops that cause audible hum.
Selects sonic characteristics for music (deep bass) or cinema (impact).
Adjusts the transition between speakers and subwoofer frequencies.
Details the rear panel controls and input/output sockets for the subwoofer.
Explains how to adjust the subwoofer's controls for optimal performance.
Provides guidance on optimal placement of the subwoofer in the room.
Illustrates how to connect the subwoofer to the amplifier and speakers.
Offers solutions for common problems encountered with the subwoofer.
