Do you have a question about the KEF PSW 1000 and is the answer not in the manual?
Driver Size | 10 inches |
---|---|
Amplifier Power | 100 Watts RMS |
Frequency Response | 30 Hz - 150 Hz |
Inputs | Line Level, Speaker Level |
Maximum Output | 108 dB |
Outputs | Speaker Level |
Low Pass Filter | 40Hz - 150Hz |
Type | Powered subwoofer |
Lists typical, limit, and unit values for various performance parameters.
Details specifications related to the woofer driver itself, like impedance and sensitivity.
Lists components for the pre-amplifier circuit board assembly.
Lists components for the power amplifier circuit board assembly.
Lists components for the voltage selector circuit board assembly.
Lists components related to the assembly of pre and power amplifier sections.
Lists the components for the 8-inch speaker assembly.
Lists components for the power cord and cable assembly.
Detailed circuit diagram for the pre-amplifier section.
Detailed circuit diagram for the power amplifier section.
Illustrates component placement on the voltage selector PCB.
Illustrates component placement on the pre-amplifier PCB.
Illustrates component placement on the power amplifier PCB.
Visual breakdown of the main unit's components and their assembly order.
Visual breakdown of the packaging materials and their arrangement.
Visual breakdown of the unit's assembly from a different perspective.