To Next PageTo Next Page
Need help?Do you have a question about the KEF HTB2 and is the answer not in the manual?
General| Type | Active Subwoofer |
|---|---|
| Drive units | 250mm (10in.) |
| Maximum output | 110dB |
| Weight | 13.0 kg |
| Amplifier | Class D |
| Low pass filter | 40Hz - 140Hz |
| Power requirements | 100-240V, 50/60Hz |
| Inputs | RCA Phono sockets |
| Amplifier Power | 250W RMS |
| Driver Size | 10 inch |
Explains manual usage and icons for safe installation of speakers.
Critical warnings to reduce risk of fire or electrical shock.
Details the meaning of safety symbols used in the manual.
Details connecting the subwoofer via line level to an amplifier or receiver.
Adjusts subwoofer bass response for room conditions and preferences.
Adjusts subwoofer phase, typically set to 0° or 180°.
Volume is controlled by the source equipment (amplifier/receiver).
Selects standby mode (Auto) or continuous operation (Manual).
Troubleshooting steps when the power indicator light is off.
Troubleshooting steps when the indicator is on but no sound is produced.
Addressing issues when sound is still absent after initial checks.
