To Next PageTo Next Page
Need help?Do you have a question about the KEF Q300 and is the answer not in the manual?
General| Design | Two-way bass reflex |
|---|---|
| Frequency Response | 42Hz - 40kHz |
| Crossover Frequency | 2.5kHz |
| Sensitivity | 87dB (2.83V/1m) |
| Impedance | 8 Ohms |
| Maximum Output | 110dB |
| Amplifier Requirements | 10 - 120W |
| Dimensions | 355 x 210 x 302 mm |
| Weight | 7.7kg |
| Nominal Impedance | 8 Ohms |
| Drive Units | 165mm aluminium Uni-Q, 25mm vented aluminium dome HF |
Welcome to the Q Series, encouraging users to read the manual before use.
Icons indicating correct/incorrect actions and adjustments for safe installation.
Icons for warnings, positive/negative indicators, and color associations.
Symbols for switching appliances on/off and reading instructions.
Symbols indicating sound changes or modifications.
Guidance on following the manual for best results and proper cleaning methods.
Instructions on avoiding spirit-based cleaners and protecting against humidity.
Warnings against extreme temperatures and direct sunlight exposure for optimal performance.
Important safety notice regarding dangerous trailing cables and the need to secure them.
Illustrated step-by-step guide for attaching the plinth to Q500, Q700, and Q900 models.
Visual guidance on optimal speaker positioning for various Q Series models, indicating correct and incorrect placements.
Diagrams illustrating room placement, spacing, and frequency response adjustments for Q Series speakers.
Instructions for setting up a single wire connection using the link terminals.
Instructions for setting up a bi-wired connection using the link terminals.
Diagrams illustrating single wire connections for various Q Series speaker models.
Diagrams illustrating bi-wired connections for various Q Series speaker models.
Instructions and diagrams for bi-amplified connections for specific Q Series speaker models.
Diagrams for single wire connections specifically for the Q200c and Q600c models.
Diagrams showing bi-wired connection setups for various Q Series speaker models.
Diagrams illustrating bi-amplified connection setups for specific Q Series speaker models.
Identifies common sound issues like no sound, distorted sound, or intermittent audio with corresponding symbols.
Troubleshooting steps for cable issues, signal problems, and identifying correct connections.
Visual guides detailing specific problems, recommended actions, and potential causes for speaker issues.
Detailed technical specifications for the KEF Q100 speaker model.
Detailed technical specifications for the KEF Q300 speaker model.
Detailed technical specifications for the KEF Q500 speaker model.
Detailed technical specifications for the KEF Q700 speaker model.
Detailed technical specifications for the KEF Q900 speaker model.
Detailed technical specifications for the KEF Q200c speaker model.
Detailed technical specifications for the KEF Q600c speaker model.
Detailed technical specifications for the KEF Q800ds speaker model.
