To Next PageTo Next Page
Need help?Do you have a question about the KEF Q700 and is the answer not in the manual?
General| Frequency Response | 36Hz - 40kHz |
|---|---|
| Impedance | 8 Ohms |
| Amplifier Requirements | 15 - 150W |
| Weight | 17.2 kg (37.9 lbs) |
| Crossover Frequencies | 2.5kHz |
| Drive Units | 165mm aluminium Uni-Q |
| Design | 2.5-way bass reflex |
Explanation of icons used in the manual for safe speaker installation and operation.
Guidance on reading the manual and switching off the appliance.
Information regarding modifications or changes in sound output.
Follow manual, clean with dry cloth, avoid alcohol cleaners.
Read warranty card, avoid humidity.
Avoid temperature extremes, direct sunlight, and secure trailing cables.
Diagrams for assembling the plinth onto Q500, Q700, and Q900 models.
Visual guides for optimal positioning of various Q Series speaker models.
Guidelines for speaker spacing and room layout for optimal audio performance.
Configuring single wire and bi-wired link connections.
Diagrams for single wire connections for Q100-Q800ds.
Diagrams for bi-wired connections for Q100-Q800ds.
Instructions for single wire connections for Q200c/Q600c.
Instructions for bi-amplified connections for Q200c/Q600c.
Detailed guide for bi-wired connections.
Detailed guide for bi-amplified connections.
Diagnosing issues with speaker operation and cable connections.
Identifying and resolving issues with treble, mid-range, bass, intermittent, or distorted sound.
Visual guide illustrating common speaker problems, actions, and causes.
Technical specifications for the Q100, Q300, and Q500 speaker models.
Technical specifications for the Q700, Q900, and Q200c speaker models.
Technical specifications for the Q600c and Q800ds speaker models.
A blank section for users to record personal notes or observations.
