EasyManuals Logo

KEF REFERENCE 201/2 Reference

KEF REFERENCE 201/2
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
PRECISION
As KEF’s signature technology, the Uni-Q concept is
renowned for its uncannily natural sound and stable
imaging. In the Uni-Q configuration the tweeter is
mounted at the centre of the midrange cone so that
their acoustic centres are at the same point in space.
The outputs from the two units are thereby time
aligned and will sum perfectly for all listening
positions. The profile of the midrange cone controls
the directivity of both drive units so it acts not only
as a superior midrange radiator but also as the
optimum waveguide for the upper registers.
Now, after nearly two decades of continuous
development and a host of new patented
refinements, every component of this uniquely
advanced driver array has been redesigned to
achieve a quantum leap in performance.
The tweeter now has a vented motor system with
three rare earth magnets, and a unique braced dome.
The midrange unit has a low profile surround that
eliminates edge diffraction effects.These innovations
take Uni-Q performance to a new level.
Dispersion is wider still. Power response is even
more uniform.Tonal balance is more realistic across
both direct and reverberant fields. Multi-channel
imagery is clearer and more accurate than ever.
UNI-Q
®

Other manuals for KEF REFERENCE 201/2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KEF REFERENCE 201/2 and is the answer not in the manual?

KEF REFERENCE 201/2 Specifications

General IconGeneral
TweeterYes
Speaker type3-way
Tweeter diameter25 mm
Number of drivers3
Speaker enclosureReflex
Speaker placementTabletop/bookshelf
Audio output channels2.0 channels
Mid-range driver diameter165 mm
Number of tweeter drivers1
Tweeter diameter (imperial)1 \
Mid-range driver diameter (imperial)6.5 \
Product colorBlack
Housing material-
Recommended usageSpeaker set unit
Recommended amplifier power (max)150 W
Recommended amplifier power (min)50 W
Impedance8 Ω
Sensitivity86 dB
Frequency range55 - 60000 Hz
RMS rated power- W
Crossover frequency2500 Hz
EqualizerNo
Dimensions (WxDxH)248 x 405 x 417 mm
Number of products included1 pc(s)
Connectivity technologyWired
Weight and Dimensions IconWeight and Dimensions
Depth405 mm
Width248 mm
Height417 mm
Weight12300 g

Related product manuals