Need help?Do you have a question about the KEF R3 Meta and is the answer not in the manual?
General| Type | 3-way bass reflex |
|---|---|
| Sensitivity | 87dB (2.83V/1m) |
| Maximum Output | 110dB |
| Frequency Range (-6dB) | 38Hz - 50kHz |
| Amplifier Power | 15-180W |
| Nominal Impedance | 4 Ohms (min. 3.2 Ohms) |
| Finish Options | Black / White / Walnut |
| Frequency Response | 58Hz - 28kHz (±3dB) |
| Drive Units | Uni-Q Driver Array: 25mm (1in.) vented aluminium dome tweeter with Metamaterial Absorption Technology (MAT), 125mm (5in.) aluminium midrange; 165mm (6.5in.) aluminium woofer |
Guidelines for optimal performance, warranty, cleaning, and environmental conditions.
Essential safety warnings regarding cable management and environmental conditions.
Step-by-step instructions for installing speaker plinths.
Recommendations for optimal speaker placement within listening environments.
Instructions for connecting speakers using a single wire per speaker.
Guidance for bi-wiring and bi-amplification setup.
Detailed setup for single wire speaker connections.
Detailed setup for bi-wired speaker connections.
Detailed setup for bi-amplified speaker connections.
Technical specifications for the R3 Meta and R5 Meta models.
Technical specifications for the R7 Meta and R11 Meta models.
Technical specifications for the R2 Meta and R6 Meta models.
To Next Page
