Need help?Do you have a question about the KEF LS50 Meta and is the answer not in the manual?
General| Frequency Range | 47Hz - 45kHz (-6dB) |
|---|---|
| Crossover Frequency | 2.1kHz |
| Amplifier Requirements | 40-100W |
| Sensitivity | 85dB (2.83V/1m) |
| Weight | 7.8kg (17.2 lbs) |
| Maximum Output | 106dB |
| Type | Bookshelf |
| Drive Units | Uni-Q driver array: 25mm (1in.) vented aluminum dome tweeter with Metamaterial Absorption Technology (MAT), 130mm (5.25in.) magnesium/aluminum alloy cone |
| Frequency Response | 47Hz - 45kHz (-6dB) |
| Nominal Impedance | 8 Ohms (min. 3.5 Ohms) |
| Dimensions | 302 x 200 x 280.5 mm (11.9 x 7.9 x 11.0 in.) |
| Finishes | Carbon Black, Titanium Grey, Mineral White, Royal Blue |
General welcome and usage advice for LS50 Meta in English.
Welcome and usage advice for LS50 Meta in French.
Welcome and usage advice for LS50 Meta in German.
Key usage guidelines and precautions for best results in English.
Critical safety warning about trailing cables being a hazard.
Explains Metamaterial Absorption Technology (MAT) for sound absorption.
Details the Uni-Q driver array and its benefits for accuracy.
Focuses on port design and its impact on sound clarity and bass.
Describes the design, curves, recessed terminals, and overall build.
Lists the available color finishes for the LS50 Meta speakers.
Details the warranty coverage, terms, and contact information.
To Next Page
