KEF LS50 Meta - Technical Specifications

Specifications
(FRA) Specifications (DEU) Technische daten (ITA) Specifiche (SPA) Especificaciones (POR) Especifica~oes (NLD) Specificaties
(DAN) Spec1fikationer (POL) Specyfikacjatechniczna (RUS) TexH111YeCK111e xapaKTep111cr111K111 (ELL) npol51aypmptc; UPN) ;z~ •:;?
(CHI-S) mm (CHI -T) m.Wt (KOR) 9-RAf~
Model
Design
Drive units
Crossover frequency
Frequency range (-6dB)
Typical in-room bass response (- 6dB)
Frequency response (±3dB)
Harmonic distortion (90dB, Im)
Maximum output
Amplifier power (recommended)
Nominal impedance
Sensitivity (2.83V/ Im)
Weight*
Dimension (H x W x D)
with terminal•
• Measurement per unit
LSS0 Meta
Two-way bass reflex
Uni-Q Driver Array:
HF: 25 mm ( I in.) vented aluminium dome with Metamaterial Absorption Technology
MF/LF: 130 mm (5.25 i n.) aluminium cone
2.1 kHz
47 Hz - 45 kHz
26 Hz
79 Hz - 28 kHz
<0.4% 175 Hz - 20 kHz
<0.1 % 300 Hz - IO kHz
106 dB
40-I0OW
8 0 (min. 3.5 0)
85 dB
7.8 kg ( 17.2 lbs.)
302 x 200 x 280.5 mm
( I 1 .9 x 7.9 x I 1.0 in.)
Metamaterial Absorption Technology developed with Acoustic Metamatenals Group.
KEF reserves the right 1n line wrth continuing resean:h and development, to amend or change spec,ficafons. E&OE.
7