KEF REFERENCE 201/2 - User Manual

To Next Page

OWNERS MANUAL

Model 201/2 Model 202/2c Model 203/2 Model 204/2c Model 205/2 Model 206/2ds Model 207/2

Thank you for purchasing KEF Reference Series

loudspeakers. These have been designed to

faithfully reproduce high quality sound over many

years of use and should provide realistic

reproduction of music and speech. Please take a

little time to read these instructions prior to use.

Your KEF Reference Loudspeakers are tall,

slim and extremely heavy. Installed correctly on

a smooth, level surface, your loudspeakers

should be entirely safe to listen to and to

live with.

However, if you have small children, large pets,

the infirm, uneven flooring or unusually thick

carpeting in your home, then correct adjustment

of the foot assemblies is imperative, if safe,

stable operation is to be achieved.

Warning: The metal tweeter dome now has

protective mesh at the centre of the Uni-Q

driver array; if however this is compromised and

the dome itself is dented, it will permanently

impair performance.

1. Avoid temperature extremes.

2. Avoid damp.

3. Avoid direct sunlight.

4. Clean with the KEF cloth provided.

5. Do not use spirit based cleaners.

If you are at all uncertain about setting up, operating or caring for your system

your dealer will be pleased to assist you.

1. Read this manual carefully, especially the

safety information, before attempting to

assemble and operate the system.

2. Follow the unpacking and assembly

instructions on the cartons. Please note that

lifting the heavier Model 207/2 and Model

204/2c requires two able-bodied persons.

3. Never connect the system directly to the

electricity supply.

4. Trailing cables are dangerous. Ensure all

cables are secure and tidy.

5. When stripping cables use only tools

designed specifically for the purpose ie:

correct wire cutters or cable strippers.

Do not attempt to strip cables with a knife as

this could result in serious injury.

Important Safety Information

General Care of your System

Part No.: 290201E

Issue 2: January 2007

Other manuals for KEF REFERENCE 201/2

Reference27 pages

Need help?

Do you have a question about the KEF REFERENCE 201/2 and is the answer not in the manual?

KEF REFERENCE 201/2 Specifications

General

Tweeter	Yes
Speaker type	3-way
Tweeter diameter	25 mm
Number of drivers	3
Speaker enclosure	Reflex
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Mid-range driver diameter	165 mm
Number of tweeter drivers	1
Tweeter diameter (imperial)	1 \
Mid-range driver diameter (imperial)	6.5 \
Product color	Black
Housing material	-
Recommended usage	Speaker set unit
Recommended amplifier power (max)	150 W
Recommended amplifier power (min)	50 W
Impedance	8 Ω
Sensitivity	86 dB
Frequency range	55 - 60000 Hz
RMS rated power	- W
Crossover frequency	2500 Hz
Equalizer	No
Dimensions (WxDxH)	248 x 405 x 417 mm
Number of products included	1 pc(s)
Connectivity technology	Wired