EasyManuals Logo
Home>KEF>Speakers>REFERENCE 201/2

KEF REFERENCE 201/2 User Manual

KEF REFERENCE 201/2
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
2322
Centre loudspeaker single amplification connections
Centre loudspeaker bi-amplification connections
Centre loudspeaker tri-amplification connections
Poor quality cables can seriously compromise
the overall sound of your hi-fi system.
KEF recommends that high quality loudspeaker
cable be used for connecting your Reference
Series loudspeakers. It is good practice to keep
the cables as short as possible.
The left and right channel loudspeaker cables
should, wherever possible, be the same length
otherwise there may be a perceptible change in
output level between the loudspeakers.
Dedicated grille assemblies are factory fitted to
each loudspeaker. However, if you wish you may
remove the grille by gently pulling it forward
toward you. The grille is held on via ‘pegs’ that
locate into the front baffle grille-peg sockets
(or magnets which hold the top Uni-Q driver
array grille). If required, the grilles may be
removed during use, but KEF recommends
replacement following use.
KEF suggest removal of the grille for serious
listening. For cleaning purposes, the grilles
should be removed from the cabinets and
brushed lightly with a soft brush. Alternatively,
use a variable suction vacuum cleaner, with soft
brush attachment.
Loudspeaker Cables
Grilles
Your KEF Reference Series loudspeakers are
guaranteed against manufacturing defects in both
materials and workmanship. For further details
of how this guarantee affects you, please read
the enclosed Warranty leaflet.
It should be noted, however, that failure of
the loudspeaker due to abuse, improper or
inappropriate use and/or operation or damage
caused by other faults in your system are NOT
covered within the terms of the guarantee.
Loudspeakers are inherently reliable and rarely
give trouble. It is important to remember that
faults arising in any part of the reproducing
system will be heard via the loudspeakers
and therefore when faults occur, careful and
analytical diagnosis will be required to locate the
actual source of trouble.
Loudspeakers cannot generate hiss or hum.
Spurious noises of this type generally
originate in the electronic sections of the
equipment or even in the programme source
itself. Faults in a loudspeaker will be audible
on all programme sources. A fault which is
evident only when playing CDs but not,
for example, when using a radio tuner is unlikely
to originate with the loudspeakers.
Service problems should be discussed in the first
instance with the dealer from whom the
loudspeakers were originally purchased.
Generally, warranty claims are best handled
by your dealer. However, in case of difficulty,
please contact:
Customer Services Department
KEF Audio (UK), Eccleston Road, Tovil,
MAIDSTONE, Kent, ME15 6QP UK
Telephone No.: +44 (0)1622 672261
Fax No.: +44 (0)1622 750653
www.kef.com
Service Information
Warranty

Other manuals for KEF REFERENCE 201/2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KEF REFERENCE 201/2 and is the answer not in the manual?

KEF REFERENCE 201/2 Specifications

General IconGeneral
TweeterYes
Speaker type3-way
Tweeter diameter25 mm
Number of drivers3
Speaker enclosureReflex
Speaker placementTabletop/bookshelf
Audio output channels2.0 channels
Mid-range driver diameter165 mm
Number of tweeter drivers1
Tweeter diameter (imperial)1 \
Mid-range driver diameter (imperial)6.5 \
Product colorBlack
Housing material-
Recommended usageSpeaker set unit
Recommended amplifier power (max)150 W
Recommended amplifier power (min)50 W
Impedance8 Ω
Sensitivity86 dB
Frequency range55 - 60000 Hz
RMS rated power- W
Crossover frequency2500 Hz
EqualizerNo
Dimensions (WxDxH)248 x 405 x 417 mm
Number of products included1 pc(s)
Connectivity technologyWired
Weight and Dimensions IconWeight and Dimensions
Depth405 mm
Width248 mm
Height417 mm
Weight12300 g

Related product manuals