EasyManuals Logo

KEF REFERENCE 201/2 Reference

KEF REFERENCE 201/2
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background image
ATTENTION TO DETAIL
PRIDE
For all the technological innovation inside the new
Reference Series, the personal commitment to
build quality remains true to the uncompromised
standards originally set by Raymond Cooke.
The exceptional finish speaks for itself, but the same
obsessive attention to detail applies to the parts you
never see. KEF’s own graded OFC (Oxygen Free
Copper) cable is soldered by hand and the drivers
are magnetically shielded to prevent interference
with your TV. Signal transmission is optimised on
all models by having three pairs of fully shrouded
gold plated WBT
®
terminals to allow tri-wiring
or tri-amplification.
Naturally, performance can be fine-tuned for
your room acoustics. The KEF Uni Balance
feature allows you to adjust bass output to
compensate for the proximity of the
loudspeakers to the walls. At the high frequency
end, a four-position adjustment gives ample
‘brightness’ control to compensate for the
room’s sound absorption characteristics.
The Reference concept is all about pleasure
that lasts. So when you open the polished
wooden case that comes with your loudspeakers,
you’ll find a certificate of authenticity signed by the
craftsman who made them, along with your
Reference Series manual and all the accessories
you’re ever likely to need
.

Other manuals for KEF REFERENCE 201/2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KEF REFERENCE 201/2 and is the answer not in the manual?

KEF REFERENCE 201/2 Specifications

General IconGeneral
TweeterYes
Speaker type3-way
Tweeter diameter25 mm
Number of drivers3
Speaker enclosureReflex
Speaker placementTabletop/bookshelf
Audio output channels2.0 channels
Mid-range driver diameter165 mm
Number of tweeter drivers1
Tweeter diameter (imperial)1 \
Mid-range driver diameter (imperial)6.5 \
Product colorBlack
Housing material-
Recommended usageSpeaker set unit
Recommended amplifier power (max)150 W
Recommended amplifier power (min)50 W
Impedance8 Ω
Sensitivity86 dB
Frequency range55 - 60000 Hz
RMS rated power- W
Crossover frequency2500 Hz
EqualizerNo
Dimensions (WxDxH)248 x 405 x 417 mm
Number of products included1 pc(s)
Connectivity technologyWired
Weight and Dimensions IconWeight and Dimensions
Depth405 mm
Width248 mm
Height417 mm
Weight12300 g

Related product manuals