To Next PageTo Next Page
Need help?Do you have a question about the Kegco MDK-209 and is the answer not in the manual?
This document is an instruction manual for the Kegco MDK-209 Refrigerator, a freestanding appliance designed for cooling and dispensing beverages, likely kegged beer, given its appearance with a tap tower.
The Kegco MDK-209 Refrigerator is designed to cool and maintain beverages at a desired temperature. It features a temperature control knob that allows users to set the internal temperature within a range of 34°F to 45°F (2.2°C to 7.2°C). The unit is designed for freestanding use and includes rolling casters for easy mobility. It operates as an automatic defrost refrigerator, eliminating the need for manual defrosting. Defrost water is collected and evaporated by a tray located above the compressor. The appliance is intended for use in well-ventilated areas with ambient temperatures between 60°F (16°C) and 90°F (32°C) for optimal performance, though it can operate in ambient temperatures up to 100°F.
The refrigerator is straightforward to use. Upon initial setup, it should be allowed to stand upright for approximately 8 hours before connecting to power to ensure proper cooling system function. The interior should be cleaned with lukewarm water and a soft cloth before first use. For optimal performance, the unit requires at least 2 inches of unobstructed space around it for heat dissipation if placed under a countertop. The temperature control knob allows for easy adjustment, with a maximum setting (6) for the coldest temperature. It is recommended to run the unit for 48 hours at the maximum setting initially. The appliance is designed to be leveled using its rolling casters. Users are advised to avoid locating the unit in direct sunlight, near heat sources, or in damp areas. It must be plugged into a grounded 3-prong outlet on an exclusive circuit. The manual also provides guidance for vacation use, recommending that for longer periods of disuse, the appliance should be emptied, cleaned, dried, and left with the door slightly ajar to prevent mold.
Regular maintenance is crucial for the longevity and performance of the Kegco MDK-209 Refrigerator. Cleaning involves turning off and unplugging the unit, removing all items, and washing interior surfaces with a solution of warm water and baking soda (approximately 2 tablespoons per quart of water). Exterior surfaces should be cleaned with warm water and mild liquid detergent, then rinsed and wiped dry with a soft cloth. It is explicitly stated not to use steel wool or steel brushes on stainless steel parts to prevent contamination and rusting. The front grill and back of the unit should be dusted twice yearly, ensuring the power is off during cleaning. A complete interior and exterior cleaning is recommended annually. For transportation, the casters facilitate movement. Users should remove all items, securely tape down loose components, tape the door shut, ensure the appliance remains upright, and protect its exterior with a blanket. The automatic defrost feature simplifies maintenance by eliminating the need for manual defrosting. The manual also includes a troubleshooting guide for common issues such as the refrigerator not operating, not being cold enough, frequent cycling, vibrations, excessive noise, and door closure problems, offering possible causes and solutions.
General| Brand | Kegco |
|---|---|
| Model | MDK-209 |
| Category | Refrigerator |
| Language | English |
