KegLand Fermzilla - Component Identification; Lid Assembly Components; Fermenter Body and Accessories; Dump Valve and Collection Container

Starter Kit Instruction Manual
Page 3 of 9 www.KegLand.com.au Last Updated 1/30/2018 8:44 PM
Three Piece AirLock
(KL01595)
&
Black Cap & Fitted Gromet
Cornelius Type Pressure Relief
(PRV) RED 35psi/2.5bar
(KL05333)
Liquid/Gas Ball Lock Post
Carbonation Cap Assembly
(KL10788 – Plastic)
(KL00826 – Stainless)
NOTE: This is sold separately as
an upgrade the starter kit. This is
recommended for fermenting
under pressure. Standard plastic
bottle caps can be used here too.
Replacement Standard Tank
(KL11327 – 27L PET)
(KL11334 – 55L PET)
Replacement High
Temperature Tank
(KL11341 – 27L PEN)
(KL11358 – 55L PEN)
NOTE: High temperature tank
is sold separately as an
upgrade. This is recommended
if you want to use the
FermZilla for elevated
temperatures up to 100C
(212F)
Silicone Dip Tube & Stainless
Float Assembly for 55L and 27L.
NOTE: This is sold separately as
an upgrade the starter kit. This is
recommended for fermenting
under pressure.
Butterfly Dump Valve Assembly
(KL11389)
Threaded Lid Ring
(KL11396)
&
FlatLid
(KL11402)
&
Lid O-Ring
(KL12669)
304 Stainless 8 Leg Stand
(KL11419)
1L Collection Collection
Container with Lid, Caps and
O-ring)
(KL11365)