8-12 Status Structure
Operation event status
The used bits of the operation event register (shown in Figure 8-5) are described as follows: 
• Bit 
B1, voltage protection channel #1 (VPT1) — Set bit indicates that the battery 
channel (#1) is in voltage protection mode. In this mode, the output has been turned off 
and the front panel displays “VPT”. (Battery channel only — for the charger channel, see 
Bit 2.)
• Bit B2, v
oltage protection channel #2 (VPT2) — Set bit indicates that the charger chan-
nel (#2) is in voltage protection mode. In this mode, the output has been turned off and 
the 
front panel displays “VPT”. (Charger channel only — for the battery channel, see Bit 
1.)
• Bit B3,
 current limit #1 (CL1) — Set bit indicates that the battery channel’s (#1) output 
is in current limit. This bit clears when the instrument is no longer in current limit. 
(Battery channel only — for the charger channel, see Bit 7.)
• Bit 
B4, current limit tripped #1 (CLT1) — Set bit indicates that the battery channel’s 
(#1) output has turned off due to a current limit trip condition. This bit clears when the 
output is turned back on. (Battery channel only — for the charger channel, see Bit 8.)
• Bit B5, 
heat sink shutdown (HSS) — This bit indicates that the output has turned off 
due to the output stage heat sink overheating.
• Bit B6, 
power supply shutdown (PSS) — This bit indicates that the output has turned 
off due to the main AC/DC power supply heat sink overheating. 
• Bit B7, current limit #2 (CL2) — Se
t bit indicates that the charger channel’s (#2) output 
is in current limit. This bit clears when the instrument is no longer in current limit. 
(Charger channel only—for the battery channel, see Bit 3.)
• Bit B8,
 current limit tripped #2 (CLT2) — Set bit indicates that the charger channel’s 
(#2) output has turned off due to a current limit trip condition. This bit clears when the 
output is turned back on (charger channel only — for the battery channel, see Bit 4).
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 
TestEquipmentDepot.com